====== More Harmony Mods ======
{{:hsblog:external:harmonymods:waxpotting.jpg?200}}

===== Magnet Swap =====

The Harmony is outfitted with [[http://store.guitarfetish.com/crpafhiouhuc.html|GFS Crunchy PAF]] chrome covered humbuckers. Last month I swapped the ceramic magnets with AlNiCo 8 ones. This inspiration came from a 1977 Ibanez Les Paul Copy. Those pickups are wound to about 7k resistance (both the neck and bridge, pretty evenly) with AlNiCo 8 magnets. I noticed that they are brighter with a boingier, more dynamic, musical quality. The [[http://store.guitarfetish.com/crpafhiouhuc.html|GFS Crunchy PAFs]] are wound to about 10k neck and 14k for the bridge. Out of the box they have a thick, meaty tone. The [[http://www.projectguitar.com/tut/barmagswap.htm|magnet swap]] was relatively easy to do without even disconnecting the pickups.

Some interesting observations about the swap... The pickups aren't really any brighter, but I wasn't really expecting that anyway. They are however more dynamic, musical and boingy. Because the pickups are overwound, there is still a lot of "meat" also... I haven't yet established a preference for the overwounds vs the ones in the Ibanez. The wiring itself has already been heavily modded and in this guitar I normally favor the outer coils in series to a standard middle position. With the original magnets, the middle position had a lot of mud whereas outer coils in series is much cleaner (and almost tele-middle) sounding. The mud has really cleared up with the AlNiCo 8s in the standard middle position. 

I tend to shy away from the bridge pickup but I'm finding that position more attractive as well.  

===== Wax Potting =====
One unfortunate side effect of the magnet swap was a loosening of the coils or the cover of the bridge pickup. Found this out on stage doing the solo for [[http://www.youtube.com/watch?v=AeZxRYXZ154|Alice Cooper's School's Out]] (check out feedback @ 1:05). Normally the guitar note bleeds into feedback which has to be regulated by position in front of the amp. Instead, I got blasts of unmusical squealing as something in the pickup went haywire.

[[http://www.guitarnuts.com/technical/electrical/index.php|I found this link]] and re-potted the bridge pickup last night. Since there is about 2 pounds of copper wire in the cavity, and 5 connections per pickup I was really trying to avoid unsoldering them. Put together a simple double-boiler and mixed about 60-40 parafin to beeswax. Managed to do this without frying the guitar body although I almost burned it on the stove. The final test will be tonight when the Boneheadz play at "Del Ranch"

----

{{tag>Instruments}}

~~LINKBACK~~
~~DISCUSSION~~